Search results
1 – 10 of 15Wenjie Dong, Sifeng Liu, Zhigeng Fang, Xiaoyu Yang, Qian Hu and Liangyan Tao
The purpose of this paper is to clarify several commonly used quality cost models based on Juran’s characteristic curve. Through mathematical deduction, the lowest point of…
Abstract
Purpose
The purpose of this paper is to clarify several commonly used quality cost models based on Juran’s characteristic curve. Through mathematical deduction, the lowest point of quality cost and the lowest level of quality level (often depicted by qualification rate) can be obtained. This paper also aims to introduce a new prediction model, namely discrete grey model (DGM), to forecast the changing trend of quality cost.
Design/methodology/approach
This paper comes to the conclusion by means of mathematical deduction. To make it more clear, the authors get the lowest quality level and the lowest quality cost by taking the derivative of the equation of quality cost and quality level. By introducing the weakening buffer operator, the authors can significantly improve the prediction accuracy of DGM.
Findings
This paper demonstrates that DGM can be used to forecast quality cost based on Juran’s cost characteristic curve, especially when the authors do not have much information or the sample capacity is rather small. When operated by practical weakening buffer operator, the randomness of time series can be obviously weakened and the prediction accuracy can be significantly improved.
Practical implications
This paper uses a real case from a literature to verify the validity of discrete grey forecasting model, getting the conclusion that there is a certain degree of feasibility and rationality of DGM to forecast the variation tendency of quality cost.
Originality/value
This paper perfects the theory of quality cost based on Juran’s characteristic curve and expands the scope of application of grey system theory.
Details
Keywords
Wenjie Dong, Sifeng Liu and Zhigeng Fang
The purpose of this paper is to study the modelling mechanisms of several grey incidence analysis models with great influence, including Deng’s grey incidence model, absolute…
Abstract
Purpose
The purpose of this paper is to study the modelling mechanisms of several grey incidence analysis models with great influence, including Deng’s grey incidence model, absolute degree of grey incidence model, slope degree of incidence model, similitude degree of incidence model and closeness degree of incidence model; then analyse the problems to be solved in grey incidence analysis models; and clarify the applicable ranges of commonly used grey incidence models.
Design/methodology/approach
The paper comes to conclusions by means of comparable analysis. The authors compare several commonly used grey incidence analysis models, including Deng’s grey incidence model, absolute degree of grey incidence model, slope degree of incidence model, similitude degree of incidence model and closeness degree of incidence model and give several examples to clarify the reasons why quantitative analysis results of different models are not exactly the same.
Findings
As the intension of each kind of incidence model is clear and the extension is relatively obscure, grey incidence orders calculated by different incidence models are often different. When making actual decisions, incompatible results may appear. According to different characteristics of extraction, grey incidence analysis models can be divided into three types: incidence model based on closeness perspective, incidence model based on similarity perspective and incidence model based on comprehensive perspective.
Practical implications
The conclusions obtained in this paper can help people avoid some defects in the process of actual selection and choose the better incidence analysis model.
Originality/value
The conclusions can be used as a reference and basis for the selection of grey incidence analysis models, it can help to overcome the defects and shortcomings of models caused by themselves and screen out more excellent analytical models.
Details
Keywords
Weiliang Zhang, Sifeng Liu, Junliang Du, Liangyan Tao and Wenjie Dong
The purpose of this study is to advance a novel evaluation index system and evaluation approach for ability of older adults in China.
Abstract
Purpose
The purpose of this study is to advance a novel evaluation index system and evaluation approach for ability of older adults in China.
Design/methodology/approach
This study constructed a comprehensive older adult ability evaluation index system with 4 primary indicators and 17 secondary indicators. Grey clustering analysis and entropy weight method are combined into a robust evaluation model for the ability of older adults.
Findings
The result demonstrates that the proposed grey clustering model is readily available to calculate the disability level of elderly individuals. The constructed index system more comprehensively considers all aspects of the disability of the elderly.
Originality/value
This study provides a quantitative method and a more reasonable index system for the determination of the disability level of the elderly.
Details
Keywords
Saad Ahmed Javed, Yu Bo, Liangyan Tao and Wenjie Dong
Global supply chains experienced unprecedented changes in 2020 and the relationship between domestic and global markets needed adjustments considering the long-term impacts of the…
Abstract
Purpose
Global supply chains experienced unprecedented changes in 2020 and the relationship between domestic and global markets needed adjustments considering the long-term impacts of the changes that are unfolding around these markets. China has become the first country to announce a formal strategy – “Dual Circulation” Strategy (DCS) – to guide its self-reliant economic development in the post-COVID era. However, what exactly is the DCS and what drove China to publicize this strategy is not yet clear. This study aims to answer these questions.
Design/methodology/approach
Based on an extensive review of literature and media reports, a background has been constructed that justifies the DCS as a long-overdue historic necessity.
Findings
A novel definition of “Dual Circulation” is introduced. A novel construct to visualize the domestic circulation in light of international and domestic markets and international circulation has been presented. The study argues that maintaining optimum levels of consumption and saving rates is crucial to the DCS’s success.
Originality/value
The study pioneers the first scientific definition of the “Dual Circulation” that will pave way for future debate on the topic. Also, it is the first time an academic study on the DCS has been executed.
Details
Keywords
Meimei Liu, Yicha Zhang, Wenjie Dong, Zexin Yu, Sifeng Liu, Samuel Gomes, Hanlin Liao and Sihao Deng
This paper presents the application of grey modeling for thermal spray processing parameter analysis in less data environment.
Abstract
Purpose
This paper presents the application of grey modeling for thermal spray processing parameter analysis in less data environment.
Design/methodology/approach
Based on processing knowledge, key processing parameters of thermal spray process are analyzed and preselected. Then, linear and non-linear grey modeling models are integrated to mine the relationships between different processing parameters.
Findings
Model A reveals the linear correlation between the HVOF process parameters and the characterization of particle in-flight with average relative errors of 9.230 percent and 5.483 percent for velocity and temperature.
Research limitations/implications
The prediction accuracies of coatings properties vary, which means that there exists more complex non-linear relationship between the identified input parameters and coating results, or more unexpected factors (e.g. factors from material side) should be further investigated.
Practical implications
According to the modeling case in this paper, method has potential to deal with other diverse modeling problems in different industrial applications where challenge to collecting large quantity of data sets exists.
Originality/value
It is the first time to apply grey modeling for thermal spray processing where complicated relationships among processing parameters exist. The modeling results show reasonable results to experiment and existing processing knowledge.
Details
Keywords
Dong Liang, Wenjie Wang and Peter J. Thomas
Numerical and experimental results for different oncoming base-flow conditions indicate that nonuniform trailing edge blowing (NTEB) can expand the performance range of…
Abstract
Purpose
Numerical and experimental results for different oncoming base-flow conditions indicate that nonuniform trailing edge blowing (NTEB) can expand the performance range of compressors and reduce the thrust on the rotor, while the efficiency of the compressor can be improved by more than 2 per cent.
Design/methodology/approach
Relevant aerodynamic parameters, such as total pressure, ratio of efficiency and axial thrust, are calculated and analyzed under conditions with and without NTEB. Measurements are performed downstream of two adjacent stator blades, at seven equidistantly spaced reference locations. The experimental measurement of the interstage flow field used a dynamic four-hole probe with phase lock technique.
Findings
An axial low-speed single-stage compressor was established with flow field measurement system and nonuniform blowing system. NTEB was studied by means of numerical simulations and experiments, and it is found that the efficiency of the tested compressor can be improved by more than 2 per cent.
Originality/value
Unlike most of the previous research studies which mainly focused on the rotor/stator interaction and trailing edge uniform blowing, the research results summarized in the current paper on the stator/rotor interaction used inlet guide vanes for steady and unsteady calculations. An active control of the interstage flow field in a low-speed compressor was used to widen the working range and improve the performance of the compressor.
Details
Keywords
Brad McKenna, Wenjie Cai and Hyunsun Yoon
Research into older adults' use of social media remains limited. Driven by increasing digitalisation in China, the authors focus on Chinese older adults (aged 60–75)’ use of…
Abstract
Purpose
Research into older adults' use of social media remains limited. Driven by increasing digitalisation in China, the authors focus on Chinese older adults (aged 60–75)’ use of WeChat.
Design/methodology/approach
This study used a qualitative interpretive approach and interviewed Chinese older adults to uncover their social practices of WeChat use in everyday life.
Findings
By using social practice theory (SPT), the paper unfolds Chinese older adults' social practices of WeChat use in everyday life and reveals how they adopt and resist the drastic changes in Chinese society.
Originality/value
The study contributes to new understandings of SPT from technology use by emphasising the dynamic characteristics of its three elements. The authors synthesise both adoptions and resistance in SPT and highlight the importance of understanding three elements interdependently within specific contexts, which are conditioned by structure and agency.
Details
Keywords
Wenjie Zhang, Yun Xu and Haichao Zheng
Based on the theory of customer citizenship behavior (CCB), the purpose of this paper is to explore the antecedents and consequences of investor citizenship behavior in the field…
Abstract
Purpose
Based on the theory of customer citizenship behavior (CCB), the purpose of this paper is to explore the antecedents and consequences of investor citizenship behavior in the field of crowdfunding and have an in-depth study of the interaction effect between investors’ perceptions of novelty and investors’ motivations.
Design/methodology/approach
Based on the CCB theory and self-determination theory, the authors develop hypotheses and collect questionnaire data (a sample of 226 crowdfunding investors) from crowdfunding websites to test models and get conclusions by SPSS and smartPLS 2.0.
Findings
The results indicate that internal and external motivations significantly influence investors’ citizenship behavior, which further affects investors’ stickiness intentions. Furthermore, results show that investors’ perceptions of novelty moderate the relationships between internal/external motivations and citizenship behaviors.
Originality/value
This paper offers an in-depth explanation of the citizenship behaviors in crowdfunding, which could be an example for studying the motivations of investors’ citizenship behaviors and could also serve as a starting point to introduce the stickiness intention theory of e-commerce and virtual community into crowdfunding area. In addition, this study also made an empirical analysis of how the perceived project novelty affects the relationships between investors’ motivations and citizenship behaviors.
Details
Keywords
Yongzhen Ke, Wenjie Zhao, Shuai Yang, Kai Wang and Jiaying Liu
This paper aims to obtain a texture dental model with real images and improve the rendering effect of the dental model.
Abstract
Purpose
This paper aims to obtain a texture dental model with real images and improve the rendering effect of the dental model.
Design/methodology/approach
The paper proposes a semiautomatic method to construct a realistic dental model with real images based on two-dimensional/three-dimensional (2D/3D) registration. First, a 3D digital dental model and three intraoral images are obtained by a 3D scanner and digital single-lens reflex camera. Second, the camera projection poses for every intraoral images are calculated by using the single-objective optimization algorithm. Third, with camera poses, the preliminary projection texture mapping is performed; besides, the seam between two textures is marked. Finally, the marked regions are fused based on the image pyramid to eliminate obvious seams.
Findings
The paper provides a method to construct a realistic dental model. The method can map three intraoral images to the dental model. The experimental results show that the textured dental model without obvious distortion, dislocation and seams is constructed with simple interactions.
Originality/value
The proposed method can be applied to the digital smile design system to improve the communication efficiency between doctors, patients and technicians.
Details
Keywords
Chi Zhang, Kun He, Wenjie Zhang, Ting Jin and Yibin Ao
To further promote application of BIM technology in construction of prefabricated buildings, influencing factors and evolution laws of willingness to apply BIM technology are…
Abstract
Purpose
To further promote application of BIM technology in construction of prefabricated buildings, influencing factors and evolution laws of willingness to apply BIM technology are explored from the perspective of willingness of participants.
Design/methodology/approach
In this paper, a tripartite game model involving the design firm, component manufacturer and construction firm is constructed and a system dynamics method is used to explore the influencing factors and game evolution path of three parties' application of BIM technology, from three perspectives, cost, benefit and risk.
Findings
The government should formulate measures for promoting the application of BIM according to different BIM application willingness of the parties. When pursuing deeper BIM application, the design firm should pay attention to reducing the speculative benefits of the component manufacturer and the construction firm. The design firm and the component manufacturer should pay attention to balancing the cost and benefit of the design firm while enhancing collaborative efforts. When the component manufacturer and the construction firm cooperate closely, it is necessary to pay attention to balanced distribution of interests of both parties and lower the risk of BIM application.
Originality/value
This study fills a research gap by comprehensively investigating the influencing factors and game evolution paths of willingness of the three parties to apply BIM technology to prefabricated buildings. The research helps to effectively improve the building quality and construction efficiency, and is expected to contribute to the sustainability of built environment in the context of circular economy in China.
Details